Stainless Steel Trim Tabs

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding. The tabs are made of corrosion resistant 12 gauge, 304 stainless steel and are available in standard finish (as shown), mirror finished stainless steel, or black powder coated stainless steel. Standard tabs are available in 9″ (23cm) and 12″ (30cm) chord lengths (chord is the length from the transom to the tab trailing edge) and in widths between 9″ (23cm) and 48″ (122cm). See specification chart for dimensional details. All tabs exceeding a 24″ (61cm) width feature a 90 degree bent up trailing edge for additional strength. Edges can be turned up or down, made straight or tapered, and reinforced in any way. For galvanic protection, pre-installed zinc anodes are also available.

Trim Tabs Features

Microprocessor based trim tab control with LED tab position indicators

Single button press to move both tabs up or down simultaneously

Direct replacement for Oval LED (SETR-61) controls

Automatic return to last tab position if ignition key is turned off and back on again

Completely sealed, completely waterproof and will not deteriorate in sunlight

Automatic tab retraction and calibration with key or accessory switch off

Easy upgrade from rocker switch style control

No external power module required for single or dual actuator per tab systems

LED tab position indicators dim automatically in darkness and brighten in sunlight

Adjustable programming features located on back of specification sheet

Operates on 12 or 24 volt dc systems

Automatic Leveling Control Switch Assembly

As wind shifts, water conditions change or passengers move about, the Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride.

The ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.

Single button touch control

Automatic tab position return

Sleek bezel design

Switch Features

Microprocessor based automatic

leveling trim tab control with LED tab position indicators

Controls roll and pitch automatically

Internal GPS – no GPS antenna or network required

Automatically adapts to varying sea conditions

Completely sealed and waterproof (IP68)

UV protected – will not deteriorate in sunlight

Prevents automatic corrections while turning

Designed for planing and semi displacement hulls larger than 20ft

Actuators connect directly to ALC-1 display panel (no external power module box required)

Automatically dims LED tab position indicators in darkness and brightens in sunlight

Automatically retracts trim tabs when boat is off plane or using optional key switch connection

Dual station operation available (ALC-1D and ALC-2D does require external power module)

Operates on 10 to 30 Volts DC

Standard Actuators

The kit also includes mounting hardware, interconnecting wire and the Standard actuators, Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 second recommended stroke time or 4 second stroke time.