Stainless Steel Trim Tabs

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding. The tabs are made of corrosion resistant 12 gauge, 304 stainless steel and are available in standard finish (as shown), mirror finished stainless steel, or black powder coated stainless steel. Standard tabs are available in 9″ (23cm) and 12″ (30cm) chord lengths (chord is the length from the transom to the tab trailing edge) and in widths between 9″ (23cm) and 48″ (122cm). See specification chart for dimensional details. All tabs exceeding a 24″ (61cm) width feature a 90 degree bent up trailing edge for additional strength. Edges can be turned up or down, made straight or tapered, and reinforced in any way. For galvanic protection, pre-installed zinc anodes are also available.

Trim Tabs Features

Microprocessor based trim tab control with LED tab position indicators

Single button press to move both tabs up or down simultaneously

Direct replacement for Oval LED (SETR-61) controls

Automatic return to last tab position if ignition key is turned off and back on again

Completely sealed, completely waterproof and will not deteriorate in sunlight

Automatic tab retraction and calibration with key or accessory switch off

Easy upgrade from rocker switch style control

No external power module required for single or dual actuator per tab systems

LED tab position indicators dim automatically in darkness and brighten in sunlight

Adjustable programming features located on back of specification sheet

Operates on 12 or 24 volt dc systems

Manual Level Switch Assembly

Lectrotab’s Manual Leveling LED control incorporates features requested by boat owners to provide a user-friendly control for a more enjoyable boating experience.

Single button touch control

Automatic tab position return

Sleek bezel design

Switch Features

Microprocessor based trim tab control with LED tab position indicators

Single button press to move both tabs up or down simultaneously

Rubber overlay with a sleek bezel design

Automatic return to last tab position if ignition key is turned off and back on again

Completely sealed, completely waterproof and will not deteriorate in sunlight

Automatic tab retraction and calibration with key or accessory switch off

Easy upgrade from rocker switch style control or Oval control

No external power module required for one actuator per tab system

LED tab position indicators dim automatically in darkness and brighten in sunlight

Adjustable programming features located on back of specification sheet

Operates on 12 or 24 volt dc systems

Standard Actuators

The kit also includes mounting hardware, interconnecting wire and the Standard actuators, Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket. Actuators come in 12 and 24 VDC with 8 second recommended stroke time or 4 second stroke time.