Properties

It is a liquid water like product. It has a strong odor and evaporates quickly in the sunlight. Both the liquid and the evaporated vapor are flammable.

Intended Use

This product is intended to be used as a follow up to the phase 1 paste. It is best used to clean off the additional residue left behind that the phase 1 paste could not get off, only.

This product works well on:

*Automotive paint

*Housing paint

*Facility paint

*Boating paint, including anti-fouling

Proven to remove

*Paints: Anti-fouling, Acrylic, Enamels, Epoxies, Polyurethane, Lacquer, Varnish, Two-component paints, Copper, Tin, Oil or Lead based paints, Water and Latex based paints, Powder coatings and Shellac

*Surfaces: Wood, Fiberglass, All metals, Concrete, Brick, Stone and some automotive plastics

HOW TO USE

1- Open container

2- Pour into a pump-action spray bottle using a funnel so as not to spill the product.

3- Spray directly on to surface

4- Scrub surface using a scotchbrite

5- Spray again on to surface

6- Wipe away using a soft cloth

7- Repeat until the surface is clean of residue

8- Once dried, the surface is immediately ready for priming and painting!