STAR 10 STARTER KIT
Properties
PHASE 1 PASTE is a semi-paste, gel like substance that easily sticks and has a residue. It evaporates outside of the container. Both the semi-paste and the evaporated vapor are flammable.
PHASE 2 LIQUID is a liquid water like product. It has a strong odor and evaporates quickly in the sunlight. Both the liquid and the evaporated vapor are flammable.
Intended Use
PHASE 1 PASTE is intended to be used as a paint stripper, only.
This product works well on:
*Automotive paint
*Housing paint
*Facility paint
*Boating paint, including anti-fouling
PHASE 2 LIQUID is intended to be used as a follow up to the phase 1 paste. It is best used to clean off the additional residue left behind that the phase 1 paste could not get off, only.
Proven to remove:
*Paints: Anti-fouling, Acrylic, Enamels, Epoxies, Polyurethane, Lacquer, Varnish, Two-component paints, Copper, Tin, Oil or Lead based paints, Water and Latex based paints, Powder coatings and Shellac
*Surfaces: Wood, Fiberglass, All metals, Concrete, Brick, Stone and some automotive plastics
HOW TO USE:
PHASE 1 PASTE
1- Open container
2- Pour into small open container (plastic is recommended)
3- Using a paint brush, paint roller, or chip brush, spread the semi-paste gel over the desired area
4- Depending on hot or cold surface and weather will depend on how much to use. Also depends on how many layers of paint are on the surface
5- After 15-20 min paint should have reacted and bubbled
6- Using a paint scraper, scrape off the softened paint off.
PHASE 2 LIQUID
1- Open container
2- Pour into a pump-action spray bottle using a funnel so as not to spill the product.
3- Spray directly on to surface
4- Scrub surface using a scotchbrite
5- Spray again on to surface
6- Wipe away using a soft cloth
7- Repeat until the surface is clean of residue
8- Once dried, the surface is immediately ready for priming and painting!
Additional Information:
Not Available |